Tank only, does not include reel. Holds five 35mm or two 120/220 rolls. Accepts Auto-Load Reel. Film Capacity: 35mm: 5 rolls 120/220: 3 rolls 126: 5 rolls 127: 4 rolls [Read more]
Floating lid slows oxidation. Snug fitting cover is included for storing chemicals. Holds 12 4×5 film hangers and 1/2 gallon of solution. Also holds roll film on reels for in-dark developing. Made of high-impact plastic. [Read more]
Precision molded from clear, chemical-resistant polystyrene to guarantee long life. Cylindrical design features easy-reading uniform graduations with both ounce and metric calibrations, a tip-free base, and dripless spout. [Read more]
This 32 oz. tank holds four 35mm or two 120mm reels. With easy-pour PVC tops and tabbed lids for timely removal. These stainless steel tanks are reasonably priced and represent a best value. Tanks do not include reels. [Read more]
Precision molded from clear, chemical-resistant polystyrene to guarantee long life. Cylindrical design features easy-reading uniform graduations with both ounce and metric calibrations, a tip-free base, and dripless spout. [Read more]
RC print dryer features adjustable speed and heat controls. Dries up to 300 8 x 10 B&W prints per hour. Accepts sheets up to 12"" wide. Measures 17 x 17 x 13"". (Add 14 3/4"" to depth for rear print tray.) [Read more]
Variable speed RC print dryer has capacity to handle 600 8 x 10"" B&W prints per hour. Accepts prints up to 20"" wide. All metal construction, measures 26 x 17 x 13"". (Add 25"" to depth for rear print tray.) [Read more]
Helps film dry without curl. One is weighted, one unweighted; Made of rust-proof plastic with stainless steel pins to grip the film securely. A matt panel is provided on each clip for penciling job number. [Read more]
Shorten your drying times with this powerful dryer! Dries fiber-based prints in 15-20 minutes and resin-coated prints in 5-10 minutes. Holds a set of four 24 x 30"" Zone VI drying screens, sold separately. [Read more]
This classic method of print drying is space-effective, environmentally correct and inexpensive. Sturdy anodized bronze frames are stretched with plastic-coated fiberglass screen. If you stack the frames, the prints will only be 1/2"" apart so they will dry more slowly and will have less tendency to curl. For faster drying, see our Rack for Zone VI Screens. Screens take up minimal space and can be conveniently stacked out of the way when not in use. They are easy to wash for years of contamination-free print drying. Set of four 24 x 30"" screens. Also ideal for drying ju… [Read more]
Comes complete with one #1501 adjustable film reel, a one-reel film tank and a three-reel extension module. Note: Jobo 1500 series tanks require a stainless steel center core in order to be used with Jobo stainless steel reels. [Read more]
The 2500 series tanks are used for roll film and 4×5"" sheet film. They are not designed for traditional inversion (hand) processing because they would use too much chemistry if they weren’t used horizontally.The 2500 series tanks are designed to be used with JOBO rotary processors. [Read more]
The 2500 series tanks are used for roll film and 4×5"" sheet film. They are not designed for traditional inversion (hand) processing because they would use too much chemistry if they weren’t used horizontally.Sheet Film Kit (One-Reel) includes #2521 tank, #2512 4 x 5 Guide, #2508 Loader Base and #2509N sheet film reel. The #2509N reel allows up to six sheets of 4 x 5 film to be processed.(1) Reel2521 tank2512 4 x 5 Guide2508 Loader Base2509N sheet film reel [Read more]
Two 35mm-reel film tank comes complete with one #1501 adjustable film reel.Note: The 1500 series tanks require a stainless steel center core to work with Jobo stainless steel reels. [Read more]
This compact roll film washer handles up to eight 35mm reels or four 120/220 reels. Its 4.25"" diameter cylinder is big enough to take steel or plastic reels. The washer includes a 6′ hose with sink attachment and a five-year warranty. [Read more]
This compact roll film washer will handle up to eight 35mm reels, six 120mm reels, or four Jobo 4×5 reels. The washer’s 4.25"" diameter cylinder is big enough to take steel or plastic reels. It includes a 6′ hose with sink attachment and a five-year warranty. [Read more]
This compact roll film washer will handle up to 4 35mm rolls or two 120/220 rolls. The washer’s 4.25"" diameter cylinder is big enough to take steel or plastic reels. It includes a 6′ hose with sink attachment and a five-year warranty. [Read more]
Wash 35mm, 120mm and 4×5 sheet film in one versatile washer. Featuring an over-sized, round design.Accepts four 35mm, three 120mm or two Jobo 4×5 reels. 18 x 5.5"" O.D. [Read more]
This washer features cross-fire water jets that keep prints suspended in turbulent, fresh water for a uniform wash on both sides. A bottom draining system removes water and high-density hypo. These washers are plumbed for out-of-sink use, saving sink space for processing trays. Includes a 5 year warranty. Holds twelve 16×20, twelve 11×14 or twenty-four 8×10 prints.One to 1-1/2 gallon/minute flow rate.17-gallon capacity [Read more]
This washer features cross-fire water jets that keep prints suspended in turbulent, fresh water for a uniform wash on both sides. A bottom draining system removes water and high-density hypo. These washers are plumbed for out-of-sink use, saving sink space for processing trays.Includes a 5 year warranty. Holds twelve 8×10 or twenty-four 5×7 printsFive gallon capacityOne to 1-1/2 gallon/minute flow rate [Read more]
Use the Wand to help remove print from the washer. Consists of a plexiglass rod with a soft rubber tip to help ""Pop"" the print to the surface. [Read more]
Measure and mix all photographic chemicals conveniently and accurately in these unbreakable polypropylene beakers. Uniform ounce and metric graduations, ribbed handles (for a firm grip even when wet) and an anti-tip base. Oversized to avoid splash. [Read more]
Made of durable, heavy-gauge, stainless steel for years of reliable use. The easy-to-read graduation marks inside are calibrated in both ounces and cc’s for easy conversion. Features a pouring spout and comfortable handle for easy of use. [Read more]
Made of durable, heavy-gauge, stainless steel for years of reliable use. The easy-to-read graduation marks inside are calibrated in both ounces and cc’s for easy conversion. Features a pouring spout and comfortable handle for easy of use.32 oz. (0.9 liters) capacity. 5 1/4"" (13.3cm) high. [Read more]
Kalt high-quality plastic beakers are made of opaque plastic. They are graduated in cc and feature a pouring lip and handle for easy pouring. [Read more]
Precision molded from clear, chemical-resistant polystyrene to guarantee long life. Cylindrical design features easy-reading uniform graduations with both ounce and metric calibrations, a tip-free base, and dripless spout. [Read more]
Precision molded from clear, chemical-resistant polystyrene to guarantee long life. Cylindrical design features easy-reading uniform graduations with both ounce and metric calibrations, a tip-free base, and dripless spout. [Read more]
This 64 oz. tank holds 8, 35mm or 4, 120mm reels. Features easy-pour PVC tops and tabbed lids for timely removal. These stainless steel tanks are reasonably priced and represent a best value. Tanks do not include reels. [Read more]
This high-quality, affordable developing reel is easy to load and holds wet film securely in place during processing. Fits standard stainless steel tanks. [Read more]
This high-quality, affordable developing reel is easy to load and holds wet film securely in place during processing. Fits standard stainless steel tanks. [Read more]
This 16 oz. tank holds two 35mm reels or one 120 format reel. Features easy-pour PVC tops and tabbed lids for timely removal. These stainless steel tanks are reasonably priced and represent a best value. Tanks do not include reels. [Read more]
This 8 oz. tank holds one 35mm reel. Features easy-pour PVC tops and tabbed lids for timely removal. These stainless steel tanks are reasonably priced and represent a best value. Tanks do not include reels. [Read more]
Calumet is proud to introduce affordable, stainless steel 120 format developing reels that you can trust. These high-quality reels are made in England by Hewes to stringent manufacturing tolerances. They are easy to load and will securely hold wet film in place during processing. [Read more]
Calumet is proud to bring you affordable, stainless steel 35mm developing reels that you can trust. These high-quality reels are the genuine article, made for us in England by Hewes to stringent manufacturing tolerances. They are heavy gauge stainless. Twin sprocket posts make this easy to load and will securely hold wet film in place during processing. [Read more]
Water control center, 3"" thermometer, with F scale, garden hose thread at both ends, built in shut-off valve. Lets you control your water temperature mix. Five-year limited warranty. Plumbing connections required. [Read more]
These fully seamless, white, heavyweight, high-impact plastic trays feature maximum corrosion resistance – 58% solution of acetic acid. Safe for normal photo processing and toning. [Read more]
These fully seamless, white, heavyweight high-impact flat-bottomed plastic trays feature maximum corrosion resistance: 58% solution of acetic acid. Safe for normal photo processing and toning. [Read more]
These fully seamless, white, heavyweight high-impact flat-bottomed plastic trays feature maximum corrosion resistance: 58% solution of acetic acid. Safe for normal photo processing and toning. [Read more]
These fully seamless, white, heavyweight high-impact flat-bottomed plastic trays feature maximum corrosion resistance, 58% solution of acetic acid. Safe for normal photo processing and toning. [Read more]
These extra-deep (5-6""/13-15cm) trays are perfect for a pre-rinse holding bath, a hypo-eliminator/toning bath or even as an RC or color print washer when used with Kodak’s Automatic Tray Siphon. [Read more]
This convenient printing aid makes it possible to evaluate your prints from one position and angle, adding consistency and improving overall quality. The stand is simple to use and takes up minimal sink space, since it is designed to set up with one leg directly in the fixer or wash-holding tray. Not only does this save space, but when used in the fixer tray, it also saves chemicals by allowing the wet prints to drain back into the tray. Features two legs, or viewing surfaces, so that by reversing the stand you can choose the most comfortable viewing angle. Each viewing area is 14 x 14"… [Read more]
